Is Tech Making episkevi klimatistikon Better or Worse?

An air conditioner's filters, coils, and fins need routine maintenance for the system to work effectively and efficiently throughout its years of service. Ignoring essential maintenance ensures a constant decrease in a/c efficiency while energy use progressively increases. Have a look at our episkevi air condition Energy Saver 101 Infographic: House Cooling for more methods to help improve your convenience and the performance of your air conditioning unit.

A/c Filters

The most important upkeep task that will ensure the performance of your a/c unit is to regularly replace or clean its filters. Obstructed, dirty filters obstruct typical airflow and minimize a system's performance substantially. With regular airflow obstructed, air that bypasses the filter may carry dirt directly into the evaporator coil and impair the coil's heat-absorbing capacity. Replacing an unclean, stopped up filter with a tidy one can reduce your a/c unit's energy consumption by 5% to 15%.

For central air conditioners, filters are typically situated someplace along the return duct's length. Common filter places remain in walls, ceilings, heating systems, or in the air conditioner itself. Space ac system have a filter installed in the grill that deals with into the room.

Some types of filters are multiple-use; others should be replaced. They are available in a range of types and performances. Clean or change your air conditioning system's filter or filters monthly or two throughout the cooling season. Filters might require more frequent attention if the air conditioner remains in continuous use, undergoes dirty conditions, or you have fur-bearing pets in your home.

Air Conditioning System Coils

The a/c's evaporator coil and condenser coil collect dirt over their months and years of service. A tidy filter avoids the evaporator coil from staining rapidly. In time, nevertheless, the evaporator coil will still gather dirt. This dirt minimizes airflow and insulates the coil, decreasing its ability to take in heat. To prevent this issue, examine your evaporator coil every ΕΠΙΣΚΕΥΗ AIR CONDITION year and clean it as needed.

Outdoor condenser coils can also end up being extremely filthy if theΕΠΙΣΚΕΥΗ AIR CONDITION outdoor environment is dusty or if there is foliage close by. You can quickly see the condenser coil and notice if dirt is collecting on its fins.

You ought to lessen dirt and particles near the condenser unit. Your dryer vents, falling leaves, and lawn mower are all potential sources of dirt and particles. Cleaning up the location around the coil, removing any debris, and cutting foliage back at least 2 feet (0.6 meters) permit adequate air flow around the condenser.

Coil Fins


The aluminum fins on evaporator and condenser coils are quickly bent and can block airflow through the coil. A/c wholesalers offer a tool called a "fin comb" that will comb these fins back into almost initial condition.

Condensate Drains pipes

Occasionally pass a stiff wire through the unit's drain channels. Obstructed drain channels avoid an unit from reducing humidity, and the resulting excess moisture might stain walls or carpet.

Window Seals for Room Air Conditioners

At the start of each cooling season, inspect the seal in between the air conditioning unit and the window frame to ensure it makes contact with the system's metal case. Moisture can harm this seal, permitting cool air to escape from your house.

Getting service air condition athina ready for Winter

In the winter season, either cover your space a/c or get rid of and keep it. Covering the outside system of a central air conditioning conditioner will secure the unit from winter weather and debris.

Hiring a Specialist

When your air conditioning unit requires more than regular maintenance, hire a professional service specialist. A trained service technician will discover and repair issues in your a/c system.

The specialist should:

Look for proper amount of refrigerant

Test for refrigerant leakages using a leakage detector

Catch any refrigerant that should be left from the system, instead of unlawfully launching it to the atmosphere

Check for and seal duct leakage in main systems

Measure air flow through the evaporator coil

Verify the appropriate electric control sequence and make certain that the heater and cooling system can not operate at the same time

Examine electric terminals, clean and tighten connections, and apply a non-conductive coating if necessary

Oil motors and examine belts for tightness and wear

Examine the accuracy of the thermostat.